Peter Paul Solenoid Valve Model EH22

GAS PRESSURE RATINGSORIFICE SIZECV FACTORVALVE NUMBERACDC1/8 NPT PORTS1/4 NPT PORTS5000*#5000*#.025.010EH22M7DCCM-∆EH22M9DCCM-∆3000*3000*1/32.022EH22G7DCCM-∆EH22G9DCCM-∆2500*1500*3/64.041EH22H7DCCMG-∆EH22H9DCCMG-∆1750*5001/16.065EH22J7DCCMG-∆EH22J9DCCMG-∆650*1003/32.100EH22K7DCCMG-∆EH22K9DCCMG-∆ LIQUID PRESSURE RATINGSORIFICE SIZECV FACTORVALVE NUMBERACDC1/8 NPT PORTS1/4 NPT PORTS5000*#5000*#.025.010EH22M7DCCM-∆EH22M9DCCM-∆3000*3000*1/32.022EH22G7DCCM-∆EH22G9DCCM-∆2500*1500*3/64.041EH22H7DCCML-∆EH22H9DCCML-∆1750*5001/16.065EH22J7DCCML-∆EH22J9DCCML-∆650*1003/32.100EH22K7DCCML-∆EH22K9DCCML-∆* FKM seals not recommended for pressure above 500 psi.# DELRIN PIN SEALING ELEMENT STANDARD THIS SIZE ORIFICE. (KEL-F OPTIONAL)Ordering Information:Seal Material: Replace ∆ with desired code – Blank = Nitrile (Buna) S = Low Temp Buna. N = FKM* E = Neoprene A = EPDMWhen ordering valves or repair packs add voltage and frequency to complete valve number. for examples: valve (EH22J7DCCM 120/60) repair pack (2KEH22J AC)When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (OEH22JDDCCM 120/60) Operating Conditions:Media: Air and other non-corrosive gasses, water and oil.Filtration: Down to 60 microns or less is recommended.Valve Temperature Range:Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media.Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*Maximum Operating Pressure Differentials: See table above.Burst Pressure: 10,000 PSILeakage: Bubbletight (with polymer sealing pins) Electrical Characteristics:Coil Voltage: 12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.Nominal Power: AC — 7.3 Watts DC — 9.5 WattsCoil Construction: Molded Class F with third wire ground (Std.), Class H or Potted (Opt.)Typical Response Time on Air:  4 – 16 MillisecondsOperating Speed:  Up to 600 CPMDuty Cycle:  Continuous Mechanical CharacteristicsBody: Stainless Steel (Std.)Internal Components: Stainless Steel. Copper – AC Only.Elastomers: Nitrile (Buna) (Std.). Many other elastomers available.*Sealing Pin: Kel-F (Std.), Delrin®, Teflon®, Nylon, PEEK, Radel®, Ultem®, 303 Stainless Steel (Opt.)Orifice Diameter: See table above.Porting: 1/8″ and 1/4″ NPT (other ports available).Housing: Flame-Proof construction with 1/2″ NPT conduitMounting: Must be mounted within 30° of vertical.Listings: Valves are UL listed for use in the United States and Canada for Hazardous Locations — Class I, Div 1, Group C and D – Class II, Div 1, Group E, F, and G; Div 2, Groups A, B, C, D, E, F, and G.Life Expectancy: Millions of cycles, depending on application, lubrication, etc.Valve Weight: 1.50 lbsRepair Packs: See table above.Options: Alternate Sealing Pin Materials and Alternate Elastomers*