Peter Paul Magnetic Latching Valve Model MLVH22

GAS PRESSURE RATINGSORIFICE SIZECV FACTORVALVE NUMBERDCDIN COILLEADED COIL1/8″ NPT PORTS1/4″ NPT PORTS1/8″ NPT PORTS1/4″ NPT PORTS3300.025.010H22M7DELMH22M9DELMH22M7DGLMH22M9DGLM14001/32.022H22G7DELMH22G9DELMH22G7DGLMH22G9DGLM10503/64.041H22H7DELMH22H9DELMH22H7DGLMH22H9DGLM4251/16.065H22J7DELMH22J9DELMH22J7DGLMH22J9DGLM1503/32.100H22K7DELMH22K9DELMH22K7DGLMH22K9DGLM* FKM seals not recommended for pressure above 500 psi.Ordering Information:When ordering valves or repair packs add voltage and frequency to complete valve number. for examples: valve (H22J7DELM 24/DC) repair pack (KH22JD LM)When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (OH22JDDELM 24/DC) Operating Conditions:Media: Air and other non-corrosive gasses, water and oil.Valve Temperature Range:Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media.Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*Maximum Operating Pressure Differentials: See table above.Burst Pressure: 10,000 PSILeakage: Bubbletight (with polymer sealing pins)Vacuum:  To 5 Microns* Electrical Characteristics:Coil Voltage: 12, 24/DCNominal Power: DC — 10.0 WattsCoil Construction: Molded (Std.), Non-molded Class A and Potted Class F or Class H (Opt.)Typical Response Time on Air: Approximate 50 millisecond pulse to energize and de-energize.Operating Speed:  Up to 600 CPM Mechanical CharacteristicsBody: Stainless Steel (Std.)Internal Components: Stainless SteelElastomers: Nitrile (Buna) standard. FKM, EPDM, Neoprene and Low Temp Nitrile (Buna) are available.*Sealing Pin: Kel-F (Std.)Orifice Diameter: See table abovePorting: 1/8″ and 1/4″ NPT (other ports avaialble).Housing: Grommet and 1/2″ NPT conduit – many options available.*Mounting:  Must be mounted within 30° of vertical.Life Expectancy: Millions of cycles, depending on application, lubrication, etc.Valve Weight:1.13 lbsRepair Packs: See table above.Options: Alternate Port Locations, Alternate Elastomers, Alternate Sealing Pin Materials* Consult us for options and specifications